Usenet Newsgroups Re: Heating in 4-1/2 turn inductor From: tmoranwms@charter.net (Tim Williams) "amdx" <amdx@knology.net> wrote in message news:ec0b$4c7650d8$18ec6dd7$9856@KNOLOGY.NET...  I got some confirmation from my collaborator,  The 1/2 turn as were describing it was the LAST 1/2 turn wound on the bobbin. It doesn't happen to be nicked, forming a shorted turn perhaps? Tim -- Deep Friar: a very philosophical monk. Website: Subject  Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor GOSH!  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor  Re: Heating in 4-1/2 turn inductor